Disassembly Of Headrest; Reassembly Of Headrest - Invacare Twister Service Manual

Twister/Twister Junior
9.9.1

Disassembly of headrest

• Release clamping lever (4) and remove headrest together with headrest support (2) from the
headrest holder.
• Remove headrest upholstery (9) from the headrest shell (8) (Velcro fastener).
• Unscrew clamping lever (6) with washer (22) completely and separate headrest shell (8)
together with headrest arm (5) from the headrest holder.
• Detach screw (14) with bushes (12) and washers (22) plus headrest arm (5) from the
headrest shell (8).
• Loosen slotted screws (7) and detach headrest arm attachment (13) from the headrest shell
(8).
• Detach protecting caps (16), loosen nut (17) from screw (2) and remove screw with washers
(18).
• Detach headrest holder from clamping piece (20).
• Remove Allen screws (21) with nuts (19) and clamping piece (20) from back frame tube.
9.9.2

Reassembly of headrest

• Reassembly takes place in the reverse order.
Service Manual
Page 66 Issued:21.01.02