Setting Software Dip Switches - Konica Minolta 7155 Service Manual

25 MODE

[3] Setting Software DIP Switches

1. Procedure
Bring up the Software DIP SW Setting screen
and set software DIP switches.
Step
Enter the 25 mode.
1
[Memory setting mode menu Screen]
2
Select "
1
[Software DIP SW setting screen]
Select a DIP switch number.
Use the
3
keys.
To use numeric keys, press the DIP
switch number key at the left before
entering a DIP switch number.
Select a bit number of the selected DIP
switch.
Use the
4
keys.
To use numeric keys, press the bit num-
ber key at the upper center before enter-
ing a DIP switch number.
Select ON (=1), or OFF (=0) of the
switch.
Use the
ON
5
: Sets 1.
ON
: Sets 0.
OFF
Press the
RETURN
6
Memory setting mode menu Screen.
For the function of each switch, refer to "list of
Software DIP Switches".
Operation
Software DIP SW setting".
or key or numeric
or key or numeric
or key.
OFF
key to return to the
1-8