Recall Standard Data (Image Adjustment) - Konica Minolta 7155 Service Manual

36 MODE
machine in a dark location and facing a direc-
tion such that external light does not get into it,
then carry out the installation survey once
again.
<Error message2>
A datum with potentioal not to function non-
image-area-erase is found.
Please confirm "adjustment" - "36 mode" col-
ums of the Service Hand book.
<Countermeasure2>
If you use the non-original erasure function rel-
atively infrequently, you can use the machine
in its present installation environment.
If, however, you copy originals that have a dark
background fairly frequently, re-install the
machine in a dark location and facing a direc-
tion such that external light does not get into it,
then carry out the installation survey once
again. In this case, if there is a bright light
source, such as a fluorescent light, directly
above the machine, reconsider the installation
location and direction, or take steps to block off
the light from the light source (by using a cover,
for example), then carry out the installation
survey once again.
[15] Recall standard data (Image adjust-
ment)
Restoring image adjustment settings to standard val-
ues (factory setting data).
Step
Enter the 36 mode.
1
[Adjustment mode menu Screen]
2
Press "
[Image adjustment mode menu
Screen]
3
Select "
[Recall standard data Screen]
Press the
4
Various data is restored to standard val-
ues.
Press the
5
the Image adjustment mode menu
Screen.
1-70
Operation
Image adjustment".
2
Recall standard data".
8
key.
YES
key to return to
RETURN