Jam Code List - Konica Minolta 7155 Service Manual

JAM CODE LIST

JAM CODE LIST
Jam
Classification
Code
By-pass J10-1
J10-2
Tray 1 J11-1
4
J11-2
J11-3
J11-4
J11-5
MODEL
7155/7165/7255/7272
Cause
PS44 (registration) does not turn
ON within the predefined time
after M6 (loop roller) has turned
ON.
PS44 (registration) has turnned
ON when by-pass feed starts.
PS1 (paper feed /1) does not turn
ON within the predefined time
after MC3 (paper feed MC/1) has
turned ON.
PS1 (paper feed /1) is ON and
PS36 (loop) is OFF for the pre-
defined time after MC4 (pre-regis-
tration MC/1) has turned ON.
(7155/7165)
PS1 (paper feed /1) is ON and PS6
(horizontal conveyance /R) is OFF
for the predefined time after MC4
(pre-registration MC/1) has turned
ON. (7255/7272)
PS5 (horizontal conveyance /L) or
PS6 (horizontal conveyance /R)
does not turn ON within the pre-
defined time after MC4 (pre-regis-
tration MC/1) has turned ON.
(7255/7272)
PS25 (vertical conveyance /1) is
turned ON while in the idling sta-
tus. (7155/7165)
PS6 (horizontal conveyance /R) is
turned ON while in the idling sta-
tus. (7255/7272)
PS5 (horizontal conveyance /L) is
turned ON while in the idling sta-
tus. (7255/7272)
PS1 (paper feed /1) is turned ON
while in the idling status.
MANUAL REVISED EDITION
SERVICE MANUAL
Machine response
The machine stops
immediately after
paper ejection has
completed when jam-
ming occurs while a job
is being processed .
-
DATE
5-1
Dec. 2003
4
Countermeasure
Pull the paper out of
the by-pass feed tray
temporarily and
remove the jammed
paper.
Open the vertical
conveyance door on
the main body and
remove the jammed
paper. (7155/7165)
Pull out the horizon-
tal conveyance unit
and remove the
jammed paper.
(7255/7272)
Pull out the tray and
remove the jammed
paper.
Open the vertical
conveyance door on
the main body and
remove the jammed
paper. (7155/7165)
Pull out the horizon-
tal conveyance unit
and remove the
jammed paper.
(7255/7272)
Pull out the tray and
remove the jammed
paper.
PAGE METHOD
5-22 REPLACEMENT