Paper Up/Down Plate Horizontal Adjustment (Lt-402/Lt-412 Only) - Konica Minolta 7155 Service Manual

[4] Paper up/down plate horizontal
adjustment (LT-402/LT-412 only)
Caution: Up/down plate horizontal adjustment
must be carried out when a paper feed
jam occurs frequently or after replace-
ment of the up/down wires of a tray.
1. Tool
• Screwdriver (Phillips)
2. LCT up/down plate horizontal adjustment of LT-
402
Up/down plate
Up/down plate
a.
Screws
Up/down pulley
Adjusting
screws
Up/down pulley
Screws
1-101
OTHER ADJUSTMENT
Adjustment method
Step Operation
Raise the up/down plate.
1
Open the top cover.
2
Remove five screws to detach the side
cover (right).
3
Side cover
(right)
Open the jam access door, then remove
six screws to detach the front cover.
Jam access door
4
Screws
Side cover (right)
Screws
Screws
Screws