(Optional Parts) - Konica Minolta 7155 Service Manual

[9] Copy Count by Parts to be Replaced

(Optional Parts)

This function allows you to make the following settings
for an optional part or data:
1. Copy count resetting
2. Limit value setting
3. Part number setting
4. Part name setting
The above settings can be made for 30 data numbers,
No.1 to No.30.
The copy count is incremented by 1 for each side irre-
spective of the paper size.
1. Resetting the Copy Count by Parts to be
Replaced (Optional Parts)
This function allows you to reset the copy count
by parts to be replaced (optional parts).
Step
1 Enter the 25 mode.
[Memory setting mode menu Screen]
2
Select the "
[Copy count of part menu Screen]
3
Select the "
[Copy count of each part Screen]
Data numbers (No.), part names
(Name), part numbers (P/N), and count/
limit values are displayed in a list format.
4
Using and
name.
To scroll the screen, use
keys.
Press the
COUNT RESET
5
the count value of the part highlighted.
Press the
RETURN
6
Memory setting mode menu Screen.
Reference: If the copy count exceeds the limit,
the * mark appears to the left of the
limit value.
Operation
Parts counter".
5
Count of each parts".
2
keys, select a part
and
key to reset
key to return to the
2. Changing the data on the Copy Count by
Parts to be Replaced (Optional Parts)
This function allows you to change the limit value, part
number, or part name for the desired optional copy
count by parts to be replaced (optional parts).
Step
Enter the 25 mode.
1
[Memory setting mode menu Screen]
2
Select the "
[Copy count of part menu Screen]
3
Select the "
[Copy count of each part Screen]
Data numbers (No.), part names
(Name), part numbers (P/N), and count/
limit values are displayed in a list format.
4
Using
number.
To scroll the screen, use
keys.
Press the Part Name Set, P/N Set, or
5
Limit Set key.
[Data change screen by parts to be
replaced]
Press the
6
Limit set
data you want to change.
Enter new data using alphabetic and
7
numeric keys.
Perform steps 6 and 7 repeatedly to
8
change other data.
Press the
data to take effect.
To cancel the new data, press the
9
CANCEL
Pressing either key will display the Copy
count by parts to be replaced (optional
parts) screen again.
[Data change screen by parts to be
replaced]
10
Press the
the Memory setting mode menu Screen.
1-43
25 MODE
Operation
Parts counter".
5
Count of each parts".
2
and keys, select a data
and
or
,
Parts name P/N set
key corresponding to the
key to allow the new
OK
key.
key to return to
RETURN