Software Setting Problems; Bizhub - Konica Minolta bizhub 20 Service Manual

6. SOFTWARE SETTING PROBLEMS

The machine may not print the data correctly if there are incorrect software settings.
<User Check>
- Check that the parallel cable, USB cable and the network cable is not damaged or
broken.
- Check that the correct machine is selected if you have an interface switching device.
- Check the descriptions on the software setting in the user's guide.
- Try resetting the factory settings. (Refer to Users guide.)
Step
Failure inside the
machine
1
Machine
2 connection
USB host relay
3 PCB failure
Main PCB failure Is the problem solved
4
Cause
Does the machine print
"Printer Settings" ?
("4.20 Display of the
Machine's Log
Information (Function
code 80)" in Chapter 6.)
For Macintosh, has the
product ID been
verified?
Is the problem solved
after replacing the USB
host relay PCB ASSY?
after replacing the main
PCB ASSY?
Check Result
No
No
Yes
Yes
3-63
Remedy
Identify the error type, and
then refer to the specified
section of this chapter.
Verify the product
ID.Product ID:

bizhub 20

0216h
Replace the USB host
relay PCB ASSY.
Replace the main PCB
ASSY.
Confidential