Fns Adjusting The Shift Position (Fs-111) - Konica Minolta 7155 Service Manual

b. Adjustment
Step
Loosen the 2 set screws holding the
solenoid in place, and move the solenoid
as necessary to adjust.
1
Screws
Retighten the screws.
2
Reassemble in the opposite sequence
3
to removal.
MODEL
7155/7165/7255/7272 SERVICE MANUAL
Operation
Solenoid
7272fs1031
MANUAL REVISED EDITION
[39] FNS Adjusting the Shift Position
4
(FS-111)
1. Tool
• Screwdriver (Phillips)
2. Adjustment method
a. Preparation
Step
Remove the following parts.
• Rear cover
1
• Top cover
Switch the power OFF to ON to OFF.
2
With the M2 (roller shift) OFF (home
position), check that the actuator on
PS18 (roller shift HP) is correctly aligned
with the cutout on the shift-unit mounting
plate.
3
Cutout on Mounting Plate
If the actuator is not correctly aligned
with the cutout, carry out adjustment as
4
described below.
DATE
Dec. 2003
4
OTHER ADJUSTMENT
Operation
Actuator
7272fs1032
PAGE METHOD
1-143 ADDITION