Fns Adjusting The Paper Exit-Opening Sole- Noid (Fs-111) - Konica Minolta 7155 Service Manual

b. Adjustment
Step
Loosen the set screw holding the PS12
(paper exit-opening detector) bracket in
place, and adjust the bracket position as
necessary.
Bracket
1
Screw
Retighten the bracket set screw.
2
Reassemble in the opposite sequence
3
to removal.
MODEL
7155/7165/7255/7272 SERVICE MANUAL
Operation
7272fs1035
MANUAL REVISED EDITION
[41] FNS Adjusting the Paper Exit-Open-
4
ing Solenoid (FS-111)
1. Tool
• Screwdriver (Phillips)
• Scale
2. Adjustment method
a. Preparation
Step
Remove the following parts.
• Rear cover
1
• Top cover
With SD4 (paper exit-opening solenoid)
ON, measure the gap between the sole-
noid plunger and the bracket stopper.
Spec value for gap: A = 6.0 ±0.5mm
SD4 (Exit Opening)
2
If the gap is out of spec, carry out adjust-
3
ment describe as follows.
DATE
4 Dec. 2003
OTHER ADJUSTMENT
Operation
7272fs1036
PAGE METHOD
1-145 ADDITION