OTHER ADJUSTMENT
MODEL
7155/7165
SERVICE HANDBOOK
MANUAL
REVISED EDITION
[11] RADF paper skew adjustment
1.
Face side of original paper skew adjustment
Note: Perform this adjustment after completing
the RADF skew adjustment described in
the previous page.
Registration roller
Jam access cover
Step
Make a copy in the single sided to single
sided copy mode, then check the skew
of the original. (Either pattern A or B)
Image
1
Copypaper
feed direction
Copy paper
Paper skew pattern A
Open the Jam access cover.
2
Loosen the retaining screw to release
3
the registration roller bracket.
DATE
Apr. 2003
Screw
Registration
roller bracket
Operation
Paper skew pattern B
PAGE
METHOD
REPLACEMENT
1-110