Resetting The Circuit Breaker - Konica Minolta 7155 Service Manual

EXTERNAL SECTION

[5] Resetting the Circuit Breaker

Caution:
Be sure the power cord has been
unplugged from the wall outlet.
Caution:
Connection of cables to circuit breaker 1
and 2 (CBR1, 2) must not be changed.
a. Procedure
(1) Remove the rear cover.
(2) Remove two screws and loosen the circuit
breaker assembly.
Noise filter (NF)
Faston
(FT3: noise filter side/
black cable)
Circuit breaker 1 (CBR1)
Faston (FT4:
noise filter side/
white cable)
Screws (2)
Faston (FT1:
wall outlet side/
black cable)
Circuit breaker
assembly
Circuit breaker 2
(CBR2)
Faston (FT2:
wall outlet side/
white cable)
3-A-6 3-A-8
(3) Turn over the circuit breaker assemblies and
press the reset button at the center of each circuit
breaker.
(4) Reinstall the above parts following the removal
steps in reverse.