Revised Edition Date; Adu Unit; The Adu Stand; Removing Brush - Konica Minolta 7155 Service Manual

ADU UNIT

[1] Drawing Out and Reinstalling the
ADU Stand
Warning:
The interlock which is turned OFF when
the front right or left door opens or closes
should never be turned ON forcibly with
the ADU stand drawn out.
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
a. Procedure
(1) Open the front right and left doors.
(2) With the solenoid release lever on the ADU stand
pushed to the left, turn down the ADU drawing
lever to the left.
(3) Grip the ADU stand drawing lever and draw out

the ADU stand.

Left door
Solenoid release lever
ADU stand drawing lever
(4) To reinstall the ADU stand, push in the ADU
stand and then turn the ADU stand drawing lever
upright.
MODEL
7155/7165/7255/7272 SERVICE MANUAL
4
ADU stand
Right door
MANUAL REVISED EDITION
3-N-1
[2] Cleaning the Paper Dust Removing
Brush
In the case of the 7155/7165
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
a. Procedure
(1) Draw out the ADU stand from the main body.
(2) Release the left and right lock levers, lift the
brush handles by the handles to remove the
paper dust removing brush.
Brush handles
Lock lever
Second paper feed unit
(3) Using a blower brush, clean the paper dust

removing brush.

Paper dust removing brush
(4) Reinstall the above parts following the removal
steps in reverse.
Caution: When installing, align the projection
on the paper dust removing brush with
the positioning hole on the second
paper feed unit.
DATE PAGE
Dec. 2003 3-N-1
4
ADU UNIT
Lock lever
Projections
Paper dust
removing
brush
Positioning holes
Cleaning area
METHOD
REPLACEMENT