Konica Minolta 7155 Service Manual page 520

Internet ISW
(2) Send CHPASS command
The sending mail password described on the subject can be changed remotely. Specify 20 or less letters to
[OldPasswd] and [NewPasswd]. Use ASCII characters except space.
Password cannot be changed by mail if you don't remember the old password. Change the [CE password]
from the browser, explained in Chapter 2.
a. Example of correct password change
In this case, old password [U-BIX] is changed to new password [Sitios].
Sending mail
[ChPass U-BIX Sitios]
Returned mail
[SE's Password was changed successfully.]
When the password is changed, use [NewPasswd] from the next mail. When the mail is sent with [Old-
Passwd], it is treated as illegal mail.
b. Example of invalid password change
Old password [U-BIX] is changed to new password [Sitios].
Sending mail
[ChPass Sitios U-BIX]
Returned mail
[Old Password is Invalid.]
Then, password was not changed. Accordingly, the password is unchanged and [U-BIX].
Sending mail
[ChPass Sitios]
Returned mail
[Violation on format by new password.]
When the new password is blank, password is not changed.
MODEL
7155/7165/7255/7272 SERVICE MANUAL
→
[New Password [Sitios]]
→
[ChPass Sitios U-BIX]
→
[ChPass Sitios]
MANUAL REVISED EDITION DATE
Dec. 2003
4
PAGE METHOD
2-28 ADDITION