Setting Method; Setting Software Dipsw - Konica Minolta 7145 Service Manual

25 MODE
7.1

Setting method

A special operating mode called "25 Mode" has
been provided with this machine. This mode
enables rewriting of the non-volatile storage and
specify other various settings.
A. Procedure
1. Turn OFF the SW2 (sub power switch) when the
SW1 (main power switch) remains ON.
2. Turn the SW2 ON while pressing 2 and 5 of the
copy quantity setting buttons.
If enhanced security is enabled, CE password
input request screen appears. Input the CE
password.
25 mode menu screen appears. At this moment,
the machine turns to 25 mode and the normal
copy operation is disabled.
3. Press the desired item key on the LCD screen.
Each setting screen will appear.
4. Enter data in each selected screen.
5. Press the [RETURN] key to check the data that
has been entered.
6. Turn the SW2 off to cancel the 25 mode.
7. New data will be effective after restarting.
2
7145 series Field Service Ver.4.0 Mar. 2004
7.2

Setting software DIPSW

A. Setting method
This setting specifies the software DIPSW on
the software SW setting screen.
Note:
• The bit of the DIP switch is written in the non-vol-
atile memory every time it is changed.
B. Meaning of the values displayed on the
screen
[1]
[1] DIPSW number
Bit number (0 to 7)
[2]
Bit data : 1:ON, 0:OFF
[3]
8-bit switch values in indicated in hexadec-
[4]
imals from 00 to FF.
C. Procedure
1. Enter the 25 Mode.
2. "25 mode menu screen"
Press the [Software SW] key.
3. "Software setting screen"
Select DIP switch number.
Use the arrow key on the left.
4. Select bit number of the DIP switch.
Use the arrow key at the center.
5. Select ON (=1) or OFF (=0) of the DIP switch.
Use [ON] or [OFF] key.
[ON] : Set bit.
[OFF] : Clear bit.
6. Press the [RETURN] key to return to the "25
mode menu screen".
• For each switch function, see "List of software
DIPSW".
1-8
[2] [3] [4]