Test Pattern Density Setting; Finisher Adjustment - Konica Minolta 7155 Service Manual

36 MODE

[18] Test pattern density setting

Setting the test pattern density.
Select " Test pattern density setting" in the Adjust-
5
ment mode menu Screen to display the Test pattern
density setting Screen.
Step
Enter the 36 mode.
1
[Adjustment mode menu Screen]
2
Press " Test pattern density setting".
5
[Test pattern density Screen]
Use the numeric keys to enter the num-
ber of the test pattern to output and press
3
the key.
SET
Setting range: 0 to 255
4 Press the
COPY SCREEN
Press the START button to output a test
5
pattern.
To output another test pattern, press the
C button while pressing the P button and
6
repeat steps 3 to 5.
Press the
7
RETURN
MODEL
7155/7165/7255/7272 SERVICE MANUAL
Operation
key.
key to end.
MANUAL REVISED EDITION

[19] Finisher adjustment

Adjusting the finisher, cover sheet tray, and puncher.
1. Select " Finisher adjustment" on the Adjust-
6
ment mode menu Screen to display the Finisher
adjustment mode menu Screen.
2. Finisher adjustment items are as follows:
4
Stitch & Fold stopper adj.
1
Fold stopper adjustment
2
Cover sheet tray size adj.
3
Punch adjustment
4
(in the case of the 7255/7272)
Punch adjustment
5
(in the case of the 7155/7165)
Z-fold position adjustment
5
(in the case of the 7255/7272)
Z-fold position adjustment
6
(in the case of the 7155/7165)
Three-Fold position adjustment
6
(in the case of the 7255/7272)
Three-Fold position adjustment
7
(in the case of the 7155/7165)
2 positions staple pitch adjustment
7
(in the case of the 7255/7272)
2 positions staple pitch adjustment
8
(in the case of the 7155/7165)
3. Press the number key corresponding to the item
to be adjusted.
4. The adjustment screen for the selected adjust-
ment item appears.
5. After adjustment completes, return to the Fin-
isher adjustment mode menu Screen.
6. Press the
RETURN
ment menu to return to the Adjustment mode
menu Screen.
DATE
Dec. 2003
4
key of the Finisher adjust-
PAGE METHOD
1-78 REPLACEMENT