Lcd Adjustment; Lcd Control Panel Adjustment; Lcd Panel Contrast/Key Sound Adjustment; Settings And Adjustments Made With Thep Function - Konica Minolta 7155 Service Manual

LCD ADJUSTMENT

LCD ADJUSTMENT

[1] LCD Control Panel Adjustment

Enter the key operator mode and select "
panel adjustment" to adjust the LCD touch panel.
*If you cannot select the touch panel adjustment
mode pressing any numeric key after entering key
operator mode will take you directly to "
panel adjustment".
[2] LCD Panel Contrast/Key Sound
Adjustment
Enter the key operation mode and select "
Panel contrast/Key sound adjustment" to adjust the
contrast, backlight, and/or buzzer as desired.
SETTINGS AND ADJUST-
MENTS MADE WITH THE
P FUNCTION
Touch
10
The P function allows you to perform following numeri-
cal value checks using the P button:
1. Total counter
Touch
10
2. Copier counter
3. Printer counter
4. * PM counter
5. Density Shift (Auto <Text/Photo>)
6. Density Shift (Inclease Contrust)
LCD
7
7. Density Shift (Photo)
8. Density Shift (Text)
* PM counter is only displayed when
key is pressed on the operation panel.

[1] Checking and Printing the P Function

1. Turn ON the SW2 (sub power).
2. Press the P button.
3. Counter list is displayed.
4. Press the
5. Press the START button to print out the counter
list. The P function is cancelled automatically.
6. If the counter list need not be displayed, press the
EXIT

[2] Setting up the P Function

1. Turn ON the SW2 (sub power).
2. Press the
3. Select the required image quality, text, photo etc.
Then press the P button to set the desired density
shift.
4. Enter a value (0-5) with a numeric key, then press
the
OK
the density.
5. Press the
1-4
key.
COUNTER MENU
key.
SPECIAL
key.
ORIGINAL
key. The smaller the value, the darker
key to return to the Basic screen.
OK
Check
!