Table of Contents
Advertisement
3. Fieldbus Integration With Experion System
3.8. Block Instantiation Support
If you want
to . . .
a)
Open corresponding device
Add an
hierarchy in Library tab.
instantiable
block to
b)
Drag the instantiable block onto
device in
the given device icon in the
Project tab.
Project.
c)
Key in desired name for the block
or accept the default in the open
Name New Function Block(s)
dialog.
d)
Click Finish to close the dialog
and add the block to the device
hierarchy in Project as shown in
the following illustration.
88
Experion PKS Series A Fieldbus Interface Module User's Guide
Then,
Honeywell
Notes and References
Default name of instantiated
block may be appended with
a letter. For example, a block
with default name I_AI
becomes I_AIA.
Device does not have to be
connected to the link to
instantiate a block.
An error message is
generated, if device cannot
support an additional block.
See
Adding a fieldbus device
to Project
for reference.
R400
July 2010
Advertisement
Table of Contents
