Table of Contents
Advertisement
15.1 About Parameter Definition Editor for Fieldbus Device
Block
The Parameter Definition Editor (PDE) lets you edit the parameter attributes for fieldbus
device block types. It features a Microsoft Excel style grid interface that you can
customize to meet your specific block editing requirements. As outlined in the document
referenced below, you launch the PDE through Control Builder where it appears in the
control drawing view area.
REFERENCE - INTERNAL
Refer to the Parameter Definition Editor Reference book for more information
about using the Parameter Definition Editor.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
15. Appendix F
Honeywell
517
Advertisement
Table of Contents
