Detail Displays Contents Based On Ff Control Points Loading; Naming Conventions For Detail Displays - Honeywell Series A User Manual

Fieldbus interface module

Hide thumbs Also See for Series A:

Table of Contents

AI (Analog Input)

DO (Digital Output)

DI (Digital Input)

AO (Analog Output)

MAI (Multiple Analog Input)

Note that the FF Detail Displays and faceplates are not applicable for mixed modes (FF

AI -> CEE PID -> FF AO).

REFERENCE - INTERNAL

Refer to the following documents for more information:

HMIWeb Display Building Guide for more information on creating

Server and Client Configuration Guide for more information on configuring

Detail Displays contents based on FF control points loading

The FF control points can be loaded to FFLINK environment or CEE (C300 or C200)

environment. However, the contents in the Main tab display vary based on whether the

point is loaded to the CEE environment or to the FFLINK.

You need to follow the conventions such as block name, Point Detail Display, and Group

Detail Display to view the FF Detail Displays.

The following table lists the conventions to be followed to view the FF Detail Displays.

Experion PKS Series A Fieldbus Interface Module User's Guide

6.2. Foundation Fieldbus Detail Displays/Faceplates

Point detail display

sysdtlffpida

6. Operation

Group detail display

sysdtlffai_fp

sysdtlffao_fp

sysdtlffdi_fp

sysdtlffdo_fp

sysdtlffpid_fp

Experion pks series a