Table of Contents
Advertisement
Step
13
Key in desired control level value or
accept the default value. Click Server
Displays tab.
ATTENTION
We have intentionally skipped the History Configuration grid, Server Scripting Editor,
Associated Display, Trend grid and Group grid entries, since they are not required to
complete the configuration. Of course, you can enter this data later using the on-line
help or appropriate Knowledge Builder document for reference. Have also skipped the
Identification, Dependencies, and Template Defining tabs that are only valid with the
Template license option.
If the form includes a Block Instantiation tab, this device supports instantiable blocks.
Please see Instantiable block implementation considerations for more information.
14
Click the OK button.
15
Repeat this procedure for another
Device, as required.
16
Go to the next section Creating a Control
Module for sample PID loop.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
5.4. Configuring Fieldbus Components In a Control Strategy
Action
Honeywell
Result
Calls up the Server Displays tab.
This completes the configuration entries,
closes the form, and adds the data to
database.
(Note that the system will generate an
error message detailing any problems with
the data entered and display it at this time,
so you can correct the errors before
closing the form.)
Return to Step 1.
5. Configuration
163
Advertisement
Table of Contents
