Honeywell Series A User Manual page 228

5. Configuration
5.6. Configuring Advanced Alarming
Step
3
Type a name for a condition in Condition.
4
The default values for Alarm Criticality and Priority are Failed and Urgent
228 Experion PKS Series A Fieldbus Interface Module User's Guide
Action
ATTENTION
The condition name must be unique.
The condition name must be within the maximum limit of 32
characters.
The condition name must contain alphanumeric characters. If
the condition name contains only numeric or special
characters, then an error message appears displaying
information to provide a valid name.
An error message appears when you want to configure more
than 32 conditions.
Click OK to continue.
Honeywell
R400
July 2010