Block Parameter Definitions; Figure 49 Device Descriptions Infrastructure - Honeywell Series A User Manual

Universal
Parameters
Level 2:
Function
RESOURCE
Block
Parameters
Level 3:
Transducer
Block
Parameters
Level 4:
Manufacturer
Specific
Parameters
Resource
Block
Level 1 consists of Universal Parameters that define common attributes such as Tag,
Revision, and Mode. All blocks must include Universal Parameters.
Level 2 consists of Function Block Parameters that define parameters for all standard
Function Blocks including the standard Resource Block.
Level 3 consists of Transducer Block Parameters that define parameters for the standard
Transducer block. In some cases, the Transducer Block specification may add parameters
to the standard Resource Block.
The first three levels are the Device Descriptions provided by the Fieldbus Foundation.
Level 4 is the Manufacturer Specific Parameters that define the parameters a
manufacturer has added to the standard Function Block and Transducer Block
parameters. These added parameters will be included in the DD supplied by the
manufacturer.

Block parameter definitions

R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
Level 1:
TEMP FLOW
Transducer
Block

Figure 49 Device Descriptions infrastructure.

Honeywell
10.3. Device Descriptions and Block Parameters
PID
AI
Function
Block
10. Appendix A
Defined by
Fieldbus Foundation
Specification
Defined by
Manufacturer
417