Loading Link contents or fieldbus device
Use the following procedure to load Link contents or fieldbus devices. It assumes that the
CIOM-A FIM has been loaded and the fieldbus devices are installed and powered on the
Links.
TIP
It is a good idea to load the fieldbus device before you load the Control
Modules containing its associated function blocks to the CEE or FIM. If you
load the Control Module first, you may get an error message indicating that
the "parent" block is not available.
Step
1
In Project tab, click the desired LINK
icon.
Click Controller->Load With Contents.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
Action
Honeywell
5.5. Loading Components Online
Result
Opens the Load Dialog box.
5. Configuration
219