Honeywell Series A User Manual page 213

Step
4
Click the Yes button.
5
Wait for LINK 1 to startup and icon to turn
green.
TIP
If a connected fieldbus device is not being detected by the link, try increasing the Slot
Time value through the LINK Block Parameters configuration form. With Link icon
selected, click Edit>Configure Module Properties, click the Network Management (LM)
tab, select the Slot Time field (default value is 8), key in 10, press <Enter>, click OK,
wait for the value to change, and click OK to close the form.
6
On the Project tab,click Field Devices-
>Device Match.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
Action
Honeywell
5.5. Loading Components Online
Result
Initiates Link startup. CIOM-A FIM icon
turns green and LINK icon turns yellow.
LINK 1 is now active and detects any
uncommissioned devices
to it.
Calls up Link Parameters form with
Device Matching Dialog tab selected. The
following illustration is for example
purposes only.
5. Configuration
connected
213