6. Operation
6.2. Foundation Fieldbus Detail Displays/Faceplates
MAI
Tabs of FF Detail Displays
The FF Detail Displays are associated with different tabs. When you click a specific tab,
its associated .htm page is loaded.
REFERENCE – INTERNAL
Refer to the Experion Operator's Guide for additional details on using the
Station and calling up the displays.
The following table lists the different tabs that appear in FF Detail Displays and a short
description of each tab.
Detail Displays tab name
Main Tab Display
IO/Status Options Tab
246
Experion PKS Series A Fieldbus Interface Module User's Guide
sysdtlffmaia
Description
This page displays the Control Module-related
information based on the following:
Point is loaded to CEE environment.
Point is loaded to FFLINK.
Depending on how the point is loaded, some of the
group headings and their related parameters appear
on the page accordingly.
For example when the point is loaded in CEE
environment, the following headings appear on the
page:
Execution & Control
Alarm Enable & Summary
Assigned Controller
Similarly, when the point is loaded to FFLINK, the
following headings appear on the page:
Device & Simulation State
Alarm Summary
Assigned Module
This page contains the options that you can select for
altering the Input and output block processing and the
Honeywell
sysdtlffmai_fp
R400
July 2010