Honeywell Series A User Manual page 335

Step
1
Refer to the vendor documentation
supplied with the fieldbus device to
determine the location of the simulate
activating jumper or switch on the device.
2
Position the jumper or switch to its
simulate enable position.
3
In Monitoring tab, open the directory for
the fieldbus device icon and double click
the Analog Input function block.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
Action
Honeywell
8. Maintenance, Checkout, and Calibration
8.7. Using Fieldbus Device Simulate Function
Result
A switch or jumper is usually included in
the device to inhibit accidental activation
of the simulate feature.
You can now activate the function
through the Monitoring tab in Control
Builder.
Calls up the Block Parameters form.
335