Table of Contents
Advertisement
5. Configuration
5.5. Loading Components Online
Step
7
Once the load is complete, click
Monitoring tab.
TIP
The device's resource and transducer blocks are dedicated to the device and loaded
with the device, and can be viewed in the device directory in the Monitoring tab. The
device's other function blocks will not appear in its directory until the Control Module
containing them is loaded to the CEE or FIM, as applicable.
8
Repeat Steps 1 to 7 to load another Link
or device, as required. This completes
the LINK/fieldbus device load. Go to the
next Section Operation for information on
monitoring fieldbus devices.
224
Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Honeywell
Result
Opens Monitoring to view loaded devices
in LINK directory. This illustration is for
example purposes only.
R400
July 2010
Advertisement
Table of Contents
