Honeywell Series A User Manual page 128

5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
Step
10
Click button to select slot number
where downlink ControlNet Module is
installed from dropdown list. Use slot 04
for this example. Press <Tab>.
(Remember that chassis slot numbering
is zero-based from left to right.)
11
Click button to select address of the
ControlNet Network module in the
Remote I/O chassis that is connected to
the ControlNet Network module
(Downlink) in the Supervisory Chassis.
Use 05 for this example. Press <Tab>.
128 Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Honeywell
Result
Moves cursor to UpLink MAC Address
field.
Moves cursor to UpLink Slot Number
field.
R400
July 2010