Honeywell Series A User Manual page 177

Step
ATTENTION
For this example, we will just accept the default configuration values for the
parameters on the other tabs. The applicability of other tabs depends on whether you
are using the Hierarchical Building, Template, and/or Version Control system option(s).
Click the Parent Asset field and key in the name of the Parent that includes the entity
that this Control Module will be associated with in the Enterprise Model Builder
hierarchy. If you do not use the Enterprise Model Builder to construct a control
hierarchy for your process and you previously defined Areas of control, the name you
assigned for the control area (SCANAREA) will be used as the name for the Parent
Asset (PARENTASSET).
15
Click the OK button.
16
This completes the CM creation. Go to
the next procedure Adding blocks to CM
for sample loop.
Adding blocks to CM for sample loop
Step
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
5.4. Configuring Fieldbus Components In a Control Strategy
Action
Action
Honeywell
Result
Closes the CM Parameters form and
stores the values.
Result
5. Configuration
177