Conventions; Terms And Type Representations - Honeywell Series A User Manual

1. Introduction

1.2. Conventions

Read this section,
Fieldbus Device Commissioning -
Started
Maintenance, Checkout, and Calibration -
Adding, Removing and Replacing
Components
1.2 Conventions

Terms and type representations

The following table summarizes the terms and type representation conventions used in
this Guide.
Term/Type
Representation
Click
Double-click
Drag
Right-click
<F1>
<Ctrl>+<C>
24 Experion PKS Series A Fieldbus Interface Module User's Guide
Getting Will be commissioning the fieldbus loop. This
section provides a suggested process to follow
for fieldbus device commissioning.
Will be responsible for maintaining and trouble
shooting system operation. This section
provides information about replacing
components, upgrading firmware in
uncommissioned devices, and checking device
calibration.
Meaning
Click left mouse button once.
(Assumes cursor is positioned on
object or selection.)
Click left mouse button twice in quick
succession. (Assumes cursor is
positioned on object or selection.)
Press and hold left mouse button
while dragging cursor to new screen
location and then release the button.
(Assumes cursor is positioned on
object or selection to be moved.)
Click right mouse button once.
(Assumes cursor is positioned on
object or selection.)
Keys to be pressed are shown in
angle brackets.
Keys to be pressed together are
shown with a plus sign.
Honeywell
If you,
Example
Click the Browse button.
Double click the Station
icon.
Drag the PID function
block onto the Control
Drawing.
Right-click the AND
function block.
Press <F1> to view the
online Help.
Press <Ctrl>+<C> to
close the window.
R400
July 2010