Honeywell Series A User Manual page 221

Step
2
Confirm that checkmarks appear in the
LINK and Device checkboxes listed in the
Load? column.
(If you do not want to load a given
device, just click it to remove the check
mark from its check box.)
TIP
A Partial Load selection means that the "contained" or internal block parameters will
not be loaded to the device, which reduces the overall load time. It is generally not
necessary to load these types of parameters, since no connections are made to them.
3
Accept the default Partial Load selection
for the Resource and Transducer blocks
for a device.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
Action
Honeywell
5.5. Loading Components Online
Result
Identify what components are to be
loaded.
Confirm Partial Load for Resource and
Transducer blocks that remain dedicated
to the device.
5. Configuration
221