Table of Contents
Advertisement
5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
Step
5
Scroll in the Parameters list box to find
parameter PVLLALM.FL. Click
PVLLALM.FL.
6
Click the Select button.
7
Click IN pin on FTRIGA block. Double-
click area adjacent to pin.
8
Repeat Steps 3 to 6 to select parameter
CM101.DATAACQ_101.PVLOALM.FL
for this connection box.
9
Close Point Selector dialog box. This
completes the addition of parameter
connections for sample loop interlocks
and the CM creation tutorial. Go to the
next section Loading Components
Online.
200
Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Honeywell
Result
Parameter is inserted into the parameter
Selected Item field.
Parameter name is inserted into the
parameter connection box.
Parameter connection box appears.
See the following figure for a completed
CM102 with parameter connections.
R400
July 2010
Advertisement
Table of Contents
