8.12 Using Fieldbus Methods Manager; Prerequisites; Figure 35 Typical Other Tab For Fieldbus Device's Transducer Block - Honeywell Series A User Manual

Figure 35 Typical Other tab for fieldbus device's Transducer block.

8.12 Using Fieldbus Methods Manager

Prerequisites

Before you can launch Methods Manager you must:
Create the block type for a device from its manufacturer's DD files that include
methods data using the Type command in Control Builder.
Instantiate (create) and load the device block through Control Builder.
R400 Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
8. Maintenance, Checkout, and Calibration
8.12. Using Fieldbus Methods Manager
Honeywell
359