Table of Contents
Advertisement
6. Operation
6.2. Foundation Fieldbus Detail Displays/Faceplates
FF Detail Displays example templates for Control Builder
FF Detail Displays example templates for Control Builder are installed as part of
Experion installation. These examples are installed as part of Experion installation. These
templates can be found in the following location: C:\Program Files\Honeywell\Experion
PKS\Engineering Tools\Examples\ FF Blocks.
These example templates are not supported for MAI block as it is not supported as a
standard block in the Control Builder.
Importing FF Detail Displays example templates into Control Builder
You can import FF Detail Displays example templates into Control Builder from the
following location: C:\Program Files\Honeywell\Experion PKS\Engineering
Tools\Examples\ FF Blocks.
Using Station Event Summary display
Like the Detail displays, the Alarm and Event Summary displays support the integration
of fieldbus generated notifications and events. It is integrated with Experion component
data and is for the most part self-explanatory. The following illustration shows a typical
Event Summary display that includes FIM, Link, and Device indications. Use this display
to get a quick review of recent actions that have been initiated within the system.
Figure 30 Event Summary display includes fieldbus related details.
252
Experion PKS Series A Fieldbus Interface Module User's Guide
Honeywell
R400
July 2010
Advertisement
Table of Contents
