Table of Contents
Advertisement
what was set is retained on the device instance.
To enable/disable a condition, perform the following steps.
Step
1
From the Configure Advanced Alarming dialog box, click Condition
Listing tab.
2
Select the condition that you want to disable and clear the check box under
the Enable column.
Or
Select the condition that you want to enable and select the check box under
the Enable column.
The selected condition is disabled and the changed setting is saved in the
database.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
ATTENTION
The conditions can be enabled/disabled in the Device
Honeywell
5.6. Configuring Advanced Alarming
Action
5. Configuration
231
Advertisement
Table of Contents
