devices on the link off control before upgrading firmware in a ST3000,
STT35F, or LX1400 device.
Step
1
Double-click the uncommissioned device
icon
.
TIP
If the Load Firmware button is inactive (grayed out), try changing the device address to
a lower number in the 30 to 40 range.
R400
Experion PKS Series A Fieldbus Interface Module User's Guide
July 2010
8.5. Upgrading Firmware in Uncommissioned Device
Action
Honeywell
8. Maintenance, Checkout, and Calibration
Result
Opens the LINK Parameters form with
the Uncommissioned Devices tab open.
This illustration is for example purposes
only.
329