6. Operation
6.3. Monitoring Fieldbus Functions Through Monitoring Tab
Step
ATTENTION
With R400, Device Diagnostics tab is added to enable/disable the alarm conditions
status and configure the non-cache parameters.
To configure the non-cache parameters, perform the following steps.
c)
In the Non-Cache Parameters, click
The Point Picker dialog box appears.
d)
Select the required blocks and the related parameters appear in the dialog
box.
e)
Click OK.
The selected parameter description appears in the corresponding
Parameter Description column.
260
Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Honeywell
Result
that appears in the text box.
R400
July 2010