Table of Contents
Advertisement
5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
Step
4
Repeat Step 3 for device LX102.
TIP
If duplicate address error message appears, go to the next section Checking device
configuration for details on changing the device's network node address. It is possible
for device addresses to be set to the same default value of 20.
5
Click Close.
6
Repeat the procedure to assign other
devices or go to the next section
Checking device configuration
Checking device configuration
Use the following procedure to check the configuration of a selected fieldbus device in
the Project tab. This procedure assumes that the device has been assigned to a Link.
154
Experion PKS Series A Fieldbus Interface Module User's Guide
Action
Honeywell
Result
Device is added to the Assigned Devices
list box with the assign state icon.
Closes the dialog box.
R400
July 2010
Advertisement
Table of Contents
