SPC Type (SPC Coax Setup)
(From page 134.)
•
PTX NI (Printronix Non-impact). This option causes the printer to not
line wrap at 132 characters.
•
Avatar Comp. This option causes the printer to line wrap at 132
characters despite the current print density allowing more characters per
line.
The factory default is PTX NI.
SPC Type (SPC Twinax Setup)
(From page 135.) Allows you to select a convertor which mimics a specific
type of external protocol convertor:
•
MODE PTX NI for Printronix non-impact
•
MODE 219 for Model 219 protocol convertor
•
MODE P5000 for Printronix protocol convertor
•
MODE IBM for the IBM protocol convertor
The factory default is MODE PTX NI.
Standard Sets
(From page 140, page 144.) This menu item allows the user to select various
character sets available from the "Character Group" menu item.
The options are Standard, Arabic, Cyrillic, European, Greek, Hebrew, and
Turkish Sets.
The factory default is Standard Sets.
Text Length
(From page 142.) Text Length is the printable length on the page below the
top margin. It is in character lines at the lpi in effect when the new value is
entered.
The range is 1-255, and the factory default is 66.
193