Printronix T5000 User Manual page 217

C/T PORT Submenus
Timeout
This menu item allows the user to set the time that, when the printer has not
received data from its host, it will begin to service all other host ports looking
for data to print.
The range is 5-60 seconds, and the factory default is 10 seconds.
Report Status
When a fault condition occurs in the printer, normally only the active port
reports the fault to the host. With this menu item enabled, the port will report
any fault even when it is not the current, active port.
The options are Disable (the factory default) and Enable.
217