Vpa Check; Width Limit - Printronix T5000 User Manual

Chapter 3
Emulation Submenus
Although the range allows a selection of up to 400 DPI, the thermal printer is
capable of printing up to 203 (T5204, T5206, T5208) and 300 (T5304, T5306,
T5308) DPI vertical resolution.
The range is 72-400 DPI, and the factory default is 72 DPI.

VPA Check

(From page 136.)
•
Enable. The printer checks for dots that fall outside the intersection of the
logical and physical pages. If dots fall outside the area, the printer reports
and error to the host if the IPDS Exception Handling Control command
setting requires error reporting.
•
Disable. The printer does not report dots outside the valid printable area.
The factory default is Enable.

Width Limit

(From page 143.) When enabled, the system will limit the length and width for
expanded characters to a limit shown in Table 5, which shows the maximum
width allowed for a specific height in the range of 00 through 40 (0.0 through
4.0 inches).
The factory default is Disable.
Height
Param.
198
Table 5. Width Limit Table
Max. Width
Allowed
00 99
01 99
02 3
03 6
04 8
05 11
06 13
07 16
08 18
09 21
10 23
11 26
12 28
13 31
Height Max. Width
Param. Allowed
21 51
22 53
23 56
24 58
25 61
26 63
27 66
28 68
29 71
30 73
31 76
32 78
33 81
34 83