Host Interfaces; Power - Printronix T5000 User Manual

Host Interfaces

1. Serial RS-232 or RS-422 at 600, 1200, 2400, 4800, 9600, 19200,
2. Parallel (Centronics compatible) or IEEE 1284 bi-directional.
The RS-232 and RS-422 host interfaces shall have the following
characteristics:
Character Set:
Word Length:
Handshaking:
Input Buffer:

Power

Power Source:
Grounding:
203 dpi
Energy Star
(Power Saver Mode) 24 Watts
Standby 50 Watts
25% Print Density 142 Watts
50% Print Density 234 Watts
Table 22. Host Interface Characteristics
38400, 57600, or 115200 baud.
Table 23. Power Source and Grounding
Table 24. Power Consumption
4" printers
300 dpi
10 ips 8 ips
24 Watts
50 Watts
143 Watts
235 Watts
®
ANSI ASCII character set
Selectable 7-bit or 8-bit data format
XON/XOFF (in receive mode only) and
CTS/DTR
Selectable from 1k through 16 kbytes. XOFF is
transmitted and DTR goes low when buffer is
equal to or less than 25% of full. XON is
transmitted and DTR goes high when buffer is
25% above empty. Characters are transmitted
with no parity from the printer
115 or 230 VAC 50/60Hz switching power
supply.
Unit must be connected to a properly
grounded receptacle.
6" printers
203 dpi 300 dpi
10 ips 8 ips
24 Watts 24 Watts
50 Watts 50 Watts
205 Watts 175 Watts
360 Watts 300 Watts
Host Interfaces
8" printers
203 dpi 300 dpi
8 ips 6 ips
24 Watts 24 Watts
50 Watts 50 Watts
213 Watts 212 Watts
375 Watts 373 Watts
273