Media - Printronix T5000 User Manual

Appendix A

Media

Type:
Supply Roll:
Internal Rewinder:
Label Material:
Media Sensing:
Label Taken Sensor:
Automatic Label Peel-Off:
270
Table 17. Media - General Information
Roll-fed, die-cut continuous or fanfold labels, tags or tickets;
most direct thermal or thermal transfer materials.
8 inch (203 mm) maximum diameter on 1.5 inch (37.5 mm) to 3
inch (76 mm) diameter cores.
Accepts up to a 5 inch diameter roll of label backing.
Thermal transfer plain-coated papers, vinyl, Mylar, metallized
paper, non-woven fabric, fine woven fabric, thermal-visible light
scannable paper, infrared scannable paper, thermal ticket/tag
stock, thermally sensitive plastic stock.
Horizontally moveable sensor assembly. When set to Gap, the
assembly detects die-cut labels on liner media and notches and
holes in tag stock. When set to Mark, it senses a black mark on
the underside of tag or label stock. When set to Disable, it
senses no label indicators or ignores all existing label length
indicators on the installed media.
Detects when a printed label is at the printer exit throat. Used
only for Tear-Off and Peel-Off Media Handling modes.
Peels and presents label to the operator, one at a time.
Automatic Label Peel-Off is supported only when the internal
rewinder is installed. (The internal rewinder is a factory-installed
option.)