Printronix T5000 User Manual page 44

Chapter 2
Loading Media And Ribbon
Pivoting
Deck
13. Close the printhead by pressing down on both sides of the pivoting deck
and rotating the deck lock lever fully counterclockwise. This locks the
pivoting deck and printhead assembly into the printing position.
Verify that Print Mode in the Printer Configuration Menu is set for the
media type installed (Direct or Transfer). If Thermal Transfer media is
installed, see "Loading Ribbon" on page 45. The Print Mode submenu is
located in the MEDIA CONTROL menu. See "Main Menu" on page 79 for
more information.
IMPORTANT
Ensure the pivoting deck is down and locked before attempting to
advance media or print. Failure to do so will cause the "PRINTHEAD UP"
fault message to display.
14. Press the FEED key once to verify that the labels advance.
15. Press the PAUSE key to place the printer online.
The printer is now ready for printing.
44
Deck Lock
Lever