Printronix T5000 User Manual page 172

Chapter 3
Emulation Submenus
Error Report
(From page 141.) This menu item sets the error reporting capability of the
printer for PGL forms. The selections are the following:
•
On. Full error boundary checking reported. Any element that falls off the
current page is reported as an error.
•
Debug Mode. Puts the printer in debug mode whenever a form is defined
in CREATE mode. Each line of the CREATE form will be printed along
with an error if one has occurred.
•
Fault. Allows you to halt the printer if a PGL error occurs. If you select this
option, the PGL error prints on the paper, the message "IGP/PGL Error"
displays on the front panel, and the printer goes offline. You must clear
the error before the printer can resume normal operation.
•
Off. There is no form boundary checking whatsoever. Graphic elements
such as alpha, line, barcodes, etc. will be clipped if they are beyond the
page boundaries.
The factory default is On.
ESC d command
(From page 151.) This menu option is for backward compatibility.
•
Even dot plot. This option interprets the ESC d command as even dot
plot.
•
Double high. This option interprets the ESC d command as double high.
Select this option for backward compatibility.
The factory default is Even dot plot.
EVFU Select
(From page 146, page 149.) Controls how the printer handles vertical
formatting.
•
Enable. Selects P-Series compatible Electronic Vertical Format Unit
(EVFU).
•
Disable. Disables all EVFU processing.
The factory default is Enable.
Expanded Font (PGL)
(From page 141.) Expanded font allows the user to print characters in
different sizes with specified parameters. It also allows the selection of which
font face to use.
•
Scalable. Uses Gothic font.
•
Block. Uses Block font.
•
Alt Block 1. Uses alternative Block font with a different character set.
The factory default is Scalable.
172