Translation Tbl (SPC Coax)
(From page 134.) Prints out a table of the coax interface's current character
set. This operation is valid only when the coax interface is selected.
Translation Tbl (SPC Twinax)
(From page 135.) Prints out a table of the twinax interface's current character
set. This operation is valid only when the twinax interface is selected.
Translation Tbl (TN5250, Twinax)
(From page 138, page 131.) Prints out a table of the twinax interface's current
character set. This operation is valid only when the twinax interface is the
current interface.
True Vert 1/10
(From page 142.)
•
Disable. When disabled and in High Resolution, a vertical line's length in
one inch and 1/10 inch increments is interpreted as 70/72 inch and 7/72
inch respectively.
•
Enable. When enabled, a vertical line's length is interpreted exactly,
which is 72/72 inch in one inch increments.
The factory default is Disable.
Truncate Alpha
(From page 142.)
•
Enable. Prevents the printing of Error 48 (Element Off Page Error) if
alphanumeric data, including spaces, extends beyond the right side of the
form.
•
Disable.
The factory default is Enable.
Twinax Type
(From page 131.) This parameter defines the printer emulation as follows:
•
IPDS 256 Bytes
•
IPDS 1024 Bytes
•
5225
•
4234
After the emulation has been changed, a POR status is sent to the host.
The factory default is IPDS 256 Bytes.
195