Ext Execute Copy - Printronix T5000 User Manual

Expanded Font (VGL)
(From page 143.) Expanded font allows you to print characters in different
sizes with specified parameters. It also allows you to select block or non-block
font face.
•
Scalable. Uses Gothic font as default. Other font faces can be selected
by using the IFONT command.
•
Block. Uses Block font.
The factory default is Scalable.
Expanded Fonts (IPDS)
(From page 136.) This option specifies which algorithm is used for expanding
a character string in Write Graphics.
•
Compatible. A resizing and smoothing algorithm will be performed on the
bitmapped font.
•
Scalable. A substitution will be done to a scalable outline font. Using
Scalable will increase performance and quality, however, the substitution
will only be done for Latin 1 characters of resident bitmapped fonts, and
the type is limited to Courier and Gothic. A scalable font cannot be
selected directly, and an LF3 format cannot be downloaded.
The factory default is Scalable.

Ext Execute Copy

(From page 141.)
•
Disable. Dynamic data, overlay data, etc. are not allowed if the optional
Form Count parameter (number of forms to print) is specified as part of
the Execute command. (This setting is IGP-100 compatible.)
•
Enable. Dynamic data, overlay data, etc. are allowed within a form where
the Form Count parameter is specified in the Execute command. In this
case, the same form is printed for whatever the Form Count is.
Incremental data is not incremented since the printing page is the same.
The overlay data is only printed with the first form and not on subsequent
forms, and each form is printed on a separate page.
The factory default is Disable.
Extended Subset
(From page 145, page 150.) This menu item allows selection of the desired
extended character subset used by the printer.
The options are Code Page 437 (the factory default) and Code Page 850.
173