Thermal Consumables; Media Selection; Ribbons - Printronix T5000 User Manual

Thermal Consumables

Media Selection

Since there are two print modes of operation, there are two kinds of thermal
media:
•
•
Direct thermal media is paper coated with special chemicals that act as an
accelerator, acceptor dye, and binder. During direct thermal mode, the heat
from the thermal printhead contacts the paper and causes a chemical reaction
to take place.
Thermal transfer media requires ribbon. A wide range of Printronix thermal
transfer media is available, such as film or synthetic paper substitutes. Most
of these media options can be die-cut for easy label applications. The wide
selection of media sizes and face stocks have been tested with Printronix
ribbons for print quality and usage. Consult your Genuine Printronix Supplies
Catalog or contact the factory. You can obtain further information by calling
the Printronix Customer Solutions Center at (714) 368-2686 or accessing the
Printronix Web page at www.printronix.com.
NOTE: The term "media" used in this manual refers to all the different kinds
See "Genuine Printronix Media" on page 278 for more information.

Ribbons

Printronix offers a wide range of ribbons that have been specifically
engineered to enhance printing capabilities and to prevent premature
printhead wear. Therefore, you should use a Genuine Printronix Thermal
Ribbon in your printer.
See "Genuine Printronix Thermal Transfer Ribbons" on page 277 for more
information.
Direct thermal media
Thermal transfer media
of paper or tag stock that can be used in the printer.
Media Selection
23