Config. Control Submenus - Printronix T5000 User Manual

Chapter 3
CONFIG. CONTROL

CONFIG. CONTROL Submenus

Load Config.
The printer can store up to eight configurations in memory. This parameter
allows you to select and load a specific configuration.
The factory default is Factory.
Save Config.
This option allows you to save up to eight unique configurations to meet
different print job requirements. This eliminates the need to change the
parameter settings for each new job. The configurations are stored in
memory, and will not be lost if you turn off the printer. If the Protect Configs.
parameter is enabled, the new configuration will not be saved unless the
existing configuration has been deleted first. The factory default configuration
cannot be changed. See "Saving A Configuration" on page 72 for details.
The factory default is 1.
Print Config.
This option is used to print a listing of various stored printer configurations. It
is recommended you store printouts of your configurations in a safe place for
quick referral.
The options are Current (the factory default), Factory, Power-Up, and All.
Delete Config.
You can delete one or all of your eight customized configurations. The factory
default configuration cannot be deleted.
The factory default is 1.
Power-Up Config.
You can specify which of the eight configurations will be the power-up
configuration.
The factory default is Factory.
Protect Configs.
You can specify whether or not a new configuration should overwrite an
existing configuration when you activate the Save Configs. parameter. When
disabled (default), the new configuration will overwrite the existing
configuration. When enabled, the new configuration will not overwrite the
existing configuration, and the message "CONFIG. EXISTS / Delete First"
displays.
The options are Disable (the factory default) and Enable.
92