Printronix T5000 User Manual page 153

PROPRINTER SETUP
(cont. from prev. page)
Define CR code
(page 169)
Auto LF
(page 158)
Define LF code
(page 169)
20 CPI Condensed
(page 156)
Bold
(page 160)
FF valid at TOF
(page 174)
Alt. Char Set
(page 157)
Text Position
(page 194)
Host Command
(page 178)
Reset Cmd CFG Ld
(page 188)
(1)(2)
Form Length
(page 174)
(1)(2)
Form Length
(page 175)
(1)
Form Length
(page 175)
(2)(4)
Form Width
04.1, 06.6, or 08.5 inches*
(page 175)
(2)(4)
Form Width
(page 175)
(4)
Form Width
(page 175)
CR = CR* CR = CR + LF
Enable* Disable
LF = LF* LF = CR + LF
Enable* Disable
Disable* Enable
Enable* Disable
Set 1* Set 2
Bottom of Line* Top of Line
Enable* Ignore All
Disable* Power up config
(3)
4 or 6 inches*
(3)
101.6 or 152.4 mm*
(3)
24 or 36 lines*
(3)
(3)
104.1, 168.0, or 215.9 mm*
(3)
41, 66, or 85 characters*
Notes:
* = Factory Default
Italicized items are available only
when you enable Advanced User (in
the PRINTER CONTROL menu).
1
All three Form Length submenus
work in conjunction. When you
change the default in one
submenu, the other default values
in the other two submenus change
automatically.
2
These menus do not display when
the CT emulation is selected.
3
The factory default value depends
on the width of the printer model.
4
All three Form Width submenus
work in conjunction. When you
change the default in one
submenu, the other default values
in the other two submenus change
automatically.
Ignore CPI Ignore LPI
Current config
00.0 to 24.0 inches
00.0 to 609.6 mm
0 to 144 lines
00.0 to 13.6 inches
00.0 to 345.4 mm
0 to 272 characters
Factory config
153